Anybody out there using the Renegade Subie conversion also using the JWest Shifter Linkage setup? I already have the Rennshift setup, but continue to have bushing issues causing sloppy shifting apparently because the fabricated shifter bar (necessary to clear the engine) is not exactly right. I figured if I was going to have to adjust the shifter bar (cut it up) again I might want to go with a better setup.
Ed
I don't see any reason why it shouldn't work as long as your engine is not in the way of the shift rod ...
Even if the engine is in the way, make a new rod the bends around the engine.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)