Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Engine wiring harness

Posted by: turbo2 Feb 20 2011, 02:49 PM

Folks,

As have packed the L Jet in a box substituted for a couple of carbs and with the motor back in the car. I now need to arrange for electricity to the various bits, as I (to my understanding) only need power to the coil, fuel pump and hook up the starter/alternator + oil lamp + tachometer many of the wriggly bits are now obsolete.

Therefore wonder if any one has an idea of where the various bits hook up on the 12 point engine bay harness connector as presume most of the electrons originates from there saving me straining my old eyes in wiring diagrams and hours with a multimeter in addition to the inevitable blown fuse/burnt wire.

Thanks in adv from a very wintery Newfoundland.

Posted by: Tom Feb 21 2011, 12:37 PM

You need to visit Jeff Bowlsby's web site. Much info!!
http://bowlsby.net/914/WiringHarnesses/HarnDia_IGN_74-75L-Jet.pdf
Tom

Posted by: McMark Feb 21 2011, 01:15 PM

There are two harnesses. The FI harness, and the engine bay harness. They are separate. Grab the one with the 12pin connector and you'll have everything you need.