Printable Version of Topic

Posted by: thenewwazoo Feb 24 2011, 03:29 PM

I've got to leave town soon, and can't take my teener apart, but need some measurements taken. If you've got a caliper, an axle, a wheel hub, and maybe a little bit of time, could you help?

I'm looking for the following:

• the total height of a rear wheel hub, from rotor mounting face to the axle-side face (basically, from stem to stern)
• the height of a rear wheel hub from the rotor mount face to the bearing interface (basically, how far the wheel hub extends out from the wheel bearing)
• the length of the splined section inside the wheel hub
• the distance from the axle end of the hub to where the splines start
• the length of an axle stub from the wheel bearing face to the tip of where the axle nut threads on

Many thanks!

Posted by: rick 918-S Feb 25 2011, 12:04 AM

I don't have a car that is apart that far. but here's a for ya.

Posted by: stugray Feb 25 2011, 01:09 AM

I have all of those parts sitting on a bench right now & a set of calipers.

It will take me longer to take pictures of what I think you want than the measurements themselves.
Pester me over the weekend and I can do it, just not this late tonight.

Stu

Posted by: thenewwazoo Feb 27 2011, 05:10 PM

Alright, well, I'm in China for work and weeks away from being able to wrench on my teener. Here's hoping I don't go insane!