Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Clutch cable routing
Posted by: xsurfer Mar 12 2011, 01:47 PM
Does anyone have a photo of a six cyl. clutch cable from tunnel exit to pulley?
I can't believe mine is correctly place as it broke in under 5,000 miles.
Thanks
Gene
Posted by: sww914 Mar 12 2011, 10:02 PM
I have 2 sixes at my shop, a real 6 and a real 914-6 GT and neither one has the original hardware on it.
They're both using Adel clamps bolted to the side of the case, the GT has 2 and the 6 has 1. Not very helpful, sorry.
Posted by: xsurfer Mar 13 2011, 10:25 PM
I'm know more than when I woke up this morning.
Thanks
QUOTE(sww914 @ Mar 12 2011, 09:02 PM) 
I have 2 sixes at my shop, a real 6 and a real 914-6 GT and neither one has the original hardware on it.
They're both using Adel clamps bolted to the side of the case, the GT has 2 and the 6 has 1. Not very helpful, sorry.
Posted by: sww914 Mar 14 2011, 01:25 PM
Found the camera-
This is the GT
Attached thumbnail(s)
Posted by: euro911 Mar 14 2011, 09:39 PM
Was it lubricated?
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)