Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Too damn loud

Posted by: Razorbobsr Mar 16 2011, 09:13 AM

Morning 914 gents, I have an exhaust sys of the type that has short stacks off the head.......... then the headers, with some kind of loud ass cheary bomb muffler[LOUD!!] Whats out there that sound good????? Preforms well, easy to install, cost effective. Bob PS, look cool too!

Posted by: Woody Mar 16 2011, 09:18 AM

I bought a Kerry Hunter setup with a flowmaster from a member here. Sounds surprisingly good and not to loud.

Posted by: silver74insocal Mar 16 2011, 09:20 AM

thisthreadisworthlesswithoutpics.gif smile.gif stock muffler. what size engine? your description doesnt sound familiar. you may be able to place a WTT add and see if someone wants to trade
good luck beerchug.gif Dave

Posted by: Vacca Rabite Mar 16 2011, 09:35 AM

If you have stub pipes, then you probably have a Eurorace. Same system I have, and it is loud. I bought a bigger muffler to weld on to mine.

That said, I bet you are hearing your carbs more then you are hearing your muffler. They are also loud, and right behind your head.

Zach

Posted by: DanT Mar 16 2011, 10:05 AM

agree.gif induction noise with carbs and K&N filters is as loud or louder than your exhaust.

Posted by: jimkelly Mar 16 2011, 11:26 AM

i hear ya : )

V8


https://www.youtube.com/watch?v=nCRZ-BMejZs


2.0


https://www.youtube.com/watch?v=wuNEONSaIbs



Posted by: Drums66 Mar 16 2011, 05:00 PM

..Just find the stock Muff?idea.gif
bye1.gif popcorn[1].gif popcorn[1].gif

Posted by: plays with cars Mar 16 2011, 10:21 PM

QUOTE(esses62 @ Mar 16 2011, 07:20 AM) *

TRIAD just the right amount of loud with your right foot controling the sound

agree.gif

I think it's a great sound on my otherwise stock 2.0 and doesn't drone at cruise unlike many of the other aftermarket systems I've experienced.

Posted by: campbellcj Mar 16 2011, 10:21 PM

Assuming you have carbs then that's definitely the source of much of the sound. I had a big-four with Eurorace headers for a while and used a dynomax or flowmaster muffler setup with it; very free flowing and not tremendously LOUD (but still much louder than a stock 2.0 w/ banana muffler). Again the Weber 44's added greatly to the sound.

Of course now it's at a whole 'nother level - Weber 46 triples on a six with open megaphones...

Posted by: Razorbobsr Mar 17 2011, 05:28 AM

QUOTE(silver74insocal @ Mar 16 2011, 11:20 AM) *

thisthreadisworthlesswithoutpics.gif smile.gif stock muffler. what size engine? your description doesnt sound familiar. you may be able to place a WTT add and see if someone wants to trade
good luck beerchug.gif Dave

WWT??? Bob

Posted by: Razorbobsr Mar 17 2011, 05:31 AM

QUOTE(Vacca Rabite @ Mar 16 2011, 11:35 AM) *

If you have stub pipes, then you probably have a Eurorace. Same system I have, and it is loud. I bought a bigger muffler to weld on to mine.

That said, I bet you are hearing your carbs more then you are hearing your muffler. They are also loud, and right behind your head.

Zach
Could be......... I thought it was the wife! AA has no muffler for this header, going to have to look into some muffle shops local. Bob

Posted by: Vacca Rabite Mar 17 2011, 07:33 AM

I bought an 80s F-body OEM style muffler, designed to quiet a V8. Its not on yet, I am not sure that it is worth doing until I get the induction noise under control.

Zach

Posted by: Dave_Darling Mar 17 2011, 08:50 AM

QUOTE(Razorbobsr @ Mar 17 2011, 04:28 AM) *

WWT??? Bob


WTT. Want To Trade.

--DD

Posted by: r_towle Mar 17 2011, 12:22 PM

Get a "hush thrush" muffler at autozone.
You can get one that fits, its a oval muffler.
Get a turned downpipe for the end that points it at the ground.

Those two and either clamps or a welded on flange will get you alot quieter, and should be under 50 bucks.

Rich

Posted by: Razorbobsr Mar 20 2011, 08:03 AM

QUOTE(Dave_Darling @ Mar 17 2011, 10:50 AM) *

QUOTE(Razorbobsr @ Mar 17 2011, 04:28 AM) *

WWT??? Bob


WTT. Want To Trade.

--DD
What you have in mind?? Sorry for the delay, been busy! Bob

Posted by: Razorbobsr Mar 20 2011, 08:14 AM

QUOTE(Vacca Rabite @ Mar 17 2011, 09:33 AM) *

I bought an 80s F-body OEM style muffler, designed to quiet a V8. Its not on yet, I am not sure that it is worth doing until I get the induction noise under control.

Zach
' Induction Noise' Know what it is but can you explain what your running into? Bob

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)