I have everything mounted on the car trany, axles, shift rods and shifter. The car is still on the jack strands. I put the car on gear (1st ) and I am able to turn the back wheels freely. I removed the dizzy cap to see if its spinning and it does not.
Is that normal? did I do something wrong? or is the clutch cable to tight? Does not seem tight to me.
Stop one wheel from moving with a block or jack.
Then turn the other wheel in reverse (turns the motor the right direction)
Do it in 5th, its alot easier to do.
Rich
Nope. Either tire will work.
Either side.
Rich
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)