Posted by: miketeener Mar 28 2011, 07:29 AM
Looking for pics, info and help on welding on a 944 top onto our beloved 914? thanks, in advance- mike
Posted by: AZ914 Mar 28 2011, 07:44 AM
Here ya go:
http://www.914world.com/bbs2/index.php?showtopic=76305&st=0
Posted by: Root_Werks Mar 28 2011, 10:35 AM
QUOTE(messix @ Mar 28 2011, 08:54 AM)
Only losers weld 944 tops onto 914's.
Posted by: JRust Mar 28 2011, 02:12 PM
QUOTE(AZ914 @ Mar 28 2011, 06:44 AM)
Here ya go:
http://www.914world.com/bbs2/index.php?showtopic=76305&st=0
Only one I know of done here! I sure wouldn't call the guy a loser though. I hope someday to get him to do one for me
. Not anytime soon though
Posted by: moparrob Mar 28 2011, 02:26 PM
QUOTE(messix @ Mar 28 2011, 08:54 AM)
It cant be done
Oh, by the way, you can't turbo a 914 either...
Posted by: messix Mar 28 2011, 05:22 PM
"If I take my type 2 engine and put it in my type 4, then take my type 4 engine and put that into my type 3 so I can take my type 3 engine and put it into my type 1 so I can get my type 1 running again, would that work?"
Dan you need to stop painting cars in your garage with the doors closed......
Posted by: kg6dxn Mar 28 2011, 06:16 PM
QUOTE(messix @ Mar 28 2011, 04:22 PM)
"If I take my type 2 engine and put it in my type 4, then take my type 4 engine and put that into my type 3 so I can take my type 3 engine and put it into my type 1 so I can get my type 1 running again, would that work?"
Dan you need to stop painting cars in your garage with the doors closed......
No. The type 3 fan shroud will not fit in a type 1 unless you make it a Baja
.
Posted by: Root_Werks Mar 28 2011, 09:01 PM
SSSSHHHHHHH!
You guys are messing me up, I'm trying to set my timing.
Posted by: KELTY360 Mar 28 2011, 11:29 PM
QUOTE(Root_Werks @ Mar 28 2011, 07:01 PM)
SSSSHHHHHHH!
You guys are messing me up, I'm trying to set my timing.
Retard....
Posted by: Root_Werks Mar 29 2011, 08:41 AM
QUOTE(KELTY360 @ Mar 28 2011, 10:29 PM)
QUOTE(Root_Werks @ Mar 28 2011, 07:01 PM)
SSSSHHHHHHH!
You guys are messing me up, I'm trying to set my timing.
Retard....
This thread turned useless pretty quick.
Posted by: messix Mar 29 2011, 05:25 PM
spontaneous AHA meeting broke out....
Posted by: charliew Mar 30 2011, 09:12 PM
Just put a early t1 sunroof on it.
Posted by: Root_Werks Mar 31 2011, 09:54 AM
QUOTE(charliew @ Mar 30 2011, 08:12 PM)
Just put a early t1 sunroof on it.
There isn't enough room for a sliding section like that. It has to be a removable section. Even a 928 roof section is too long. I looked into it.
Doing a 944 section w/o a sunroof would be stupid because it would be easier to build a complete non-sunroof section from scratch.
That thread were I put the 944 section on was because I wanted a removable sunroof to help retain the open-air feeling of the 914, but have the ridgedness of the steel top.
AA has done a couple of true 916 steel tops for customers. They are better write ups than mine.
Posted by: jaminM3 Mar 31 2011, 07:32 PM
QUOTE(KELTY360 @ Mar 28 2011, 11:29 PM)
QUOTE(Root_Werks @ Mar 28 2011, 07:01 PM)
SSSSHHHHHHH!
You guys are messing me up, I'm trying to set my timing.
Retard....
OMG.. Timing humor. I laughed out loud at work and everyone stared...