Well today I decied to put my new igintion in and replace the old one so I that way I don't have to use two keys one for the doors and the other for the ignition.
When I was trying to take out the ignition it did not come out in one whole peace like the old is. It came out bit by bit. Now its to late cause I destoryed the old one and the new one is to wide to fit. I need the part were the ignition fits in the peace. I guess my ignition switch is just going to have to hang tell I can fix it.
Here is were I got my ignition switch
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2468837476&category=34204
Attached image(s)
Pic 2
Attached image(s)
The ebay ad lied. 75 &76 have a different switch than the 74' and earlier. Besides that, you went about it wrong and screwed the pooch in the process. Ask questions like you usually do before you attempt this on your own. Your old door lock could have been rekeyed to your ignition key for about ten bucks!!!!!!
Extremely sorry, Curt
well, I see your problem... the guy in the ad misinformed... there were 3 ignition types for the 914... 70-71, 72-74 and 75-76... you got sold the 72-74 switch
just bite the bullet and buy the right switch... live and learn...
http://www.pelicanparts.com/catalog/shopcart/9144/POR_9144_electr_pg5.htm#item25
also, you could have re-keyed the locks/ignition:
http://www.pelicanparts.com/techarticles/mult_lock_rekey/mult_lock_rekey.htm
I'm real sorry it worked out like that dude...
I just noticed... that's morphenspectra... he's on the board... talk to him, he may have the right part you need... he's a stand-up guy, I'm sure it was a typo...
also,
did you follow this article?: http://www.pelicanparts.com/techarticles/914_ignition_switch/914_ignition_switch.htm
yours should not have came apart like that
It's not the mechanical part of the switch that cause's the no engine turn over thing. It's the electrical part on the rear of the switch( the plastic part). Did ya screw up the part of the steering column that the switch fits into? I think I have one for a 75 if ya can't find it locally, but I'll have to look and make sure.
i have a 75 -76 ignition send it back and ill send you the right one.if you need it to keep youre car going then ill get it out to you then you send the old one back. e mail me at hjhl@worldnet.att.net well get you fixed up right my wife does all the listing for our co and miss typed it i know the diffrence in ign.ive owned all almost all years of 914 .but i just realized i need youre ign and key or the door locks back to get them on all the same key.email us.
Now that's SERVICE!
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)