Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Crank fire Ignition install

Posted by: hars914 May 7 2004, 05:51 AM

I am in the process of installing an Electromotive crank fire on my 2.0L six.
I notice people install the coil unit in the center of the shroud. Does anyone
have any pictures of how this unit is supported.I plan on painting the shroud soon
but would like to install any brackets that are needed first.

Posted by: TimT May 7 2004, 11:17 AM

Rich Clewett makes a little platform that mounts over the oil vent, its basically 4 aluminum spacers about 3"long that take the place of the nut that hold the cover on, then a rectangular alum plate mounts to the 4 studs..pretty easy to make yourself

I have it on my 6, ill try and take some pics

Posted by: hars914 May 9 2004, 03:43 PM

Thanks Tim,
Pictures woul be great

Posted by: TimT May 9 2004, 05:58 PM

Well these pics suck, but I think you will get this one option

Attached image(s)

Posted by: TimT May 9 2004, 06:00 PM

Sorry I have ugly forearms

Attached image(s)

Posted by: hars914 May 10 2004, 05:17 AM

TIM,
The pics are perfect, Thanks