Can anyone provide pics of the best place to lift a 914 from with a two post lift(2 points forward and 2 points aft...4 arms total) Thanks much. Dave
jacking donuts on bottom of car.
I put a piece of 1/2 plywood large enough so it hits donut and sits on the curved wheel well pinchweld too.
Under the donuts, under the F fender pinchwelds, up to the F tube of the rear trailing arms, or under the motor mount bolts depending on what you need to get to. If it's a bare tub and the floors are already hammered it doesn't matter where you put them.
trying to avoid this are you??
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)