Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Who's going to the Reno Zone 7 Auto-x

Posted by: nine14cats May 10 2004, 07:25 PM

Who's planning on making it to the 2 day PCA Zone 7 Auto-x at Stead Airport in Reno?

http://www.pca-ggr.org/pdf/2004zone3and4ax.pdf

We can do the 914Club Corral!

Roll Call.......

We're in....both days!

Bill and Doris Pickering

Posted by: trekkor May 10 2004, 07:58 PM

I'll be there both days!

Posted by: SirAndy May 12 2004, 10:31 PM

just spend 4 hours breaking into my car, switching the ignition switch and re-keying my drivers side door-handle ...

now all i need is a good alignement and she's ready to be driven again ...

so, it looks like i'm IN for the AX fun!
Andy

Posted by: Randal May 12 2004, 11:06 PM

I'm in; going up tomorrow night.

Talked to Pat Costin tonight who is designing the course. I know the course has at least 17 corners! It'll be like a big street course, with some big straighaways.

Hope it doesn't snow on Friday when we set up the course. It actually did two year ago and we had nothing but T-shirts and (BRRRRR..) was it cold.

Posted by: Brad Roberts May 13 2004, 01:12 AM

I plan to leave here around 12pm on Friday. I *think* Andy/Jason/Britain/Angel/Birgit will leave SJ around 3pm. I should ask BillP when they are leaving. I could probably ride with them instead of driving up by myself.

B

Posted by: trekkor May 13 2004, 03:45 PM

Up and ready!

Thanks to Jim Cole of B&B Foreign Car Service in Napa, for use of the trailer.

Notice the homemade extendo ramps to get up there. They're 12 feet long to get up on the 2 foot deck.

Attached image(s)

Posted by: SirAndy May 13 2004, 10:19 PM

got the car back from the alignment shop today.
the front is TIGHT, i mean, 1 degree on the steering wheel at speed and she goes instantly. no play. very precise.

they also took out some negative camber in the back, supposedly better.
now one of the tires (drivers side) seems to rub a bit on the outside fender.

we'll see how that all works out this weekend,
Andy