Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Rebuilt Engine

Posted by: papermaster May 13 2004, 09:49 PM

Have got quotes on a rebuild for a 2.0 liter 74 starting at 3K to 5K. The 3K quote comes with a 18K mile warranty. But not sure of the mechanics rep (German Import in Simi Valley, CA) as got quote of 5K (and could go higher) from TREK in North Hollywood (as per this board it's a good shop).

Sure 3K is great price but does that sound too low?

Posted by: Jake Raby May 13 2004, 09:55 PM

Damn, for a stockish rebuild I get about 5K, and thats even with ceramic lifters, powdercoated tin, balance, and dyno time..

I think the going rate is about 4K judging from what customers tell me.

Posted by: bernbomb914 May 13 2004, 10:55 PM

save your money and buy one of jakes kits it will be cheaper in the end. I Know from my experiance.

Bernie

Posted by: Mark Henry May 14 2004, 07:31 AM

Ask them for a list of the exact services that they are going to do (to call it rebuilt) and post them here.

The heads are where a large chunk of the money should be going.

Posted by: Jake Raby May 14 2004, 07:36 AM

if at least800.00 of the $$$ isn't going into the heads- you're getting cheated.

Posted by: ! May 14 2004, 07:36 AM

Just labor will run 2K......then add in gaskets, lifters, cam, and any while you are in there stuff.....not forgetting valve job, guides, any valves that are out of spec......priced a sodium valve lately?

Adds up quick......

BTW, if ya want instant gratification, I just MAY know where a rebuilt 2056 is for sale.....4500 outright and you get to KEEP YOUR motor....