How does the quality of their (pelican parts) fiberglass pieces compare with other manufactures? Or who makes them for them? Their prices seem decent for the flares at least.
Thanks
Any fiberglass can be good or bad. Mostly it matters on the care and patience of the person doing the installation. Don't know who Pelican buys their flares from currently.
Usually, fiberglass does entail a fair amount of cursing as they never seems to really fit right out of the mold.
Unless it's a race car, metal flares are the way to go on a street car. If you ever want to sell the car, a future owner will be much easier to find if you can advertise metal flares instead of fiberglass.
I plan to do steel in the future( when I get the car painted) but after browsing through the recent bolt on fiberglass flare thread, I feel like that would be a decently cost efective route to get the car on the road and shaken down before disassembly for paint.
What thread are you talking about?
Linky link?
And if you are planning to bolt/rivet/screw them on...get the cheap ones...they will be fine.
Rich
This thread
http://www.914world.com/bbs2/index.php?showtopic=117186
I wanna get my parts all mounted, holes drilled and mistakes made before I send it in for paint so I'm not messing up an expensive paint job.
I am not sure, but the part number starts with QRS on some of the parts. I am assuming they are from QRS who sells on ebay.
I was actually looking at these:
http://www.pelicanparts.com/cgi-bin/smart/more_info.cgi?pn=PEL-914-401&catalog_description=Fiberglass%20GT%20Flares%2C%20Rear%20%39%2Dinch%20%28Pair%29%2C%20%39%31%34%20%31%2E%37%2F%31%2E%38%2F%32%2E%30%20%28%31%39%37%30%2D%37%36%29%2C%20%39%31%34%2D%36%20%28%31%39%37%30%2D%37%32%29
the QRS are nice but I feel like with the ones I've linked I can easily go to steel when the time comes with out having to undo significant changes (other than removing the fiberglass flares).
I saw some QRS panels at Glenn's... VERY nice stuff.
That Rothman's Livery 914 off-roader isn't too far off!
(Now... to find a nice tub)
Does anyone know where this style of glass fender+flare can be bought? The closest I can easily find always have the sails cut off.
Attached image(s)
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)