When I first got the car I immediately stripped out the AC which leaves 2 rather large rectangular holes in the trunk. Any pix on how others have filled this hole? Could this hole be used to rapidly dispose of beer cans from the cockpit with a clever shuttle system?
Going to do attempt to do that soon (this weekend or next, maybe both) just preping it right now.
I can take photo's if you want..
Andrew
Had the same problem with my car. Filled thanks to a sawsall party out west.
John
Attached image(s)
adfsw
Attached image(s)
dfgdd
Attached image(s)
That looks great, I have to do the same job, PO ran car without front seal for what looks like many years, have about 4 large rust holes.
You could always leave the holes...maybe shrink them up a bit w/ metal and install a GT style front mounted oil cooler Since the hole is already there, might as well go hole-hog and do a GT conversion, haha.
Seriously, I'd say just find an old rust bucket parts car and cut the part off you need, like what John2kx did.
Speaking of John2kx, I have a question. You filled in the hole, but you are putting a v8 in yours no? Won't you have to cut a new hole to let the radiator air out? Good looking patch though
Thanks for the PIX. Time for a party
Here's the oil cooler that utilized the already cut A/C hole in the front trunk on my car.....
Bill P.
Attached image(s)
Bill P.
Any Pix from below?
Patrick
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)