Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Wires to Brake master cylinder

Posted by: Joe Ricard May 20 2004, 08:11 PM

Wht is there two wires brown with whiye stripe and plain brown. Only one terminal on the switch?

Posted by: Joe Ricard May 20 2004, 08:12 PM

Seems I am about 12 oz. low on beer. Can't type for crap.

Posted by: tat2dphreak May 20 2004, 08:14 PM

I asked this question once too, you can either get the early, 2 pole style switch to put in the M/C(best option) or figure out what you want the brake light to mean... parking brake (plain brown I think) or brake failure...

someone correct me if I remembered wrong...

Posted by: Joe Ricard May 20 2004, 08:21 PM

Almost seems logical. No parking brake,Damn Recaro is too wide. So I will go with the brake warning.

Posted by: tat2dphreak May 20 2004, 08:29 PM

wise choice... it's not like you can't tell if the PB is on in our cars... they are hard to get into with the damn thing applied... unless you LIKE that sort of thing...