I just received my 914-6 Euroracing headers from Jet Hot and they look GREAT! George Narbel (Euroracing Headers) was really good to work with and did some really nice welds and bends to make these headers. I had him drop ship them to Jet Hot for coating. My 3.6 should breath easy through these 1 3/4" tubes!!
SCHWEET..........
Attached File(s)
Headers_001.JPE ( 15.14k )
Number of downloads: 0
It's so nice to get new shiney goodies!
Attached File(s)
Headers_002.JPE ( 14.97k )
Number of downloads: 0
Looks good. I too put shiny headers on my 3.6 this weekend. They don't look quite as nice, but have heat...
The rumors are true about these GHL headers not fitting to well. Fit perfectly at the head, but the left one is about 1/2" higher than the right! It all ends up working with some adjustments of the muffler hanger (and a big hammer), but the muffler still isn't very level.
I also switched to a single out exhaust. I know, I'm such a weenie - heat and single out. First impressions of the muffler: I dunno, no resonance like the dual out, but the sound isn't as good. Hmmm... It'll do for now though (the dual out just was way too loud/boomy for me).
-Steve
Attached image(s)
Here's a question for you guys - what's the good of having 1 3/4" headers, when all the mufflers have a much smaller inlet?
Attached image(s)
some more exhaust photos
Attached image(s)
What went on...
Attached image(s)
What came off... (grimey old Bursch 1 3/4" headers - was waiting until all the oil leaks were gone until the new shiny stuff went on, we'll see how long that lasts!)
Attached image(s)
Don't line up well....
Attached image(s)
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)