Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Towbar adaptor

Posted by: John Kelly May 21 2004, 01:32 PM

I'm sure this has been done before...see attached picture for my version, or look at the album for a few more pictures and information. No, I do not want to go into business making these!

http://allshops.org/cgi-bin/community/communityalbums.cgi?action=openalbum&albumid=9980160442904

John www.ghiaspecialties.com


Attached image(s)
Attached Image

Posted by: tat2dphreak May 21 2004, 01:38 PM

cool deal man!

I think James Adams has his own tow bar adapter too... a little different from this. thanks for the info!

Posted by: lmcchesney May 21 2004, 02:52 PM

Finally an after market product which will give our 914' those really quick 0-60 times.
Nice John.
welder.gif

Posted by: STL914 May 21 2004, 07:03 PM

John, how is the tow bar adapter secured in the trunk?

Posted by: John Kelly May 22 2004, 09:26 AM

Hi Gary,

There is a crossbar bolted between the bumper bracket mounts that everything is welded to. It uses the front two bolts on either side. I was going to have a brace run under the car for more stiffness, but it turns out to be stiff enough as is. Have not road tested it yet...will be using a safety chain as always, just in case.

L. McChesney, I'm thinkin' if all works out, this 914 won't have much of a problem going a lot faster than my truck...probably about 60 mph faster than I ever want to go...Roland went 140 easy with this engine in his 914...erf!

John www.ghiaspecialties.com

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)