914World.com [Powered by Invision Power Board]

Posted by: Racer Chris May 21 2004, 04:37 PM

This will become the standard Stage 1 Silencer for my Super Header exhaust systems, replacing the Phase 9.
The Stage 2 Silencer (Quiet Can) will also be 100% stainless very soon.

Attached image(s)

Posted by: TimT May 21 2004, 04:42 PM

So whats the damage for a pair?

Posted by: Racer Chris May 21 2004, 04:48 PM

QUOTE(TimT @ May 21 2004, 06:42 PM)

So whats the damage for a pair?

For the time being they will only be available with my headers for TIV applications.
Sorry Tim.

Posted by: Randal May 21 2004, 05:32 PM

Nice work Chris!

Question: Any measurements on db yet?

The reason for the question is that Laguna Seca is 92db max.

Second (hopefully not stupid) question: If I took my existing 4 into one header off my engine and put your system on, is it possible to predict a difference in performance?

Posted by: TimT May 21 2004, 06:31 PM

Awww...you mean I have to lose 2 cylinders to use these?

Posted by: Racer Chris May 21 2004, 06:33 PM

QUOTE(Randal @ May 21 2004, 07:32 PM)

Nice work Chris!

Question: Any measurements on db yet?

The reason for the question is that Laguna Seca is 92db max.

Second (hopefully not stupid) question: If I took my existing 4 into one header off my engine and put your system on, is it possible to predict a difference in performance?

Randal,
I get sound readings at SCCA races for my race car. Typically, with a muffler like this the numbers are 90-92, rarely 93. A lot depends on sound meter location and atmospheric conditions.

Yes it is possible to predict a difference in performance. Without knowing any of the particulars about your engine I already know there would be a big increase in midrange torque. That is a typical characteristic of tri-y header designs.

Printable Version of Topic