Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ 1.7 to 2.0 conversion

Posted by: john d. collard 914 May 10 2011, 01:19 PM

I am putting a 1976 2.0 into my 1973 1.7. The manual says there is only slight modifictions to the D-jetrronic system, can I use my 1.7 ECU with the 2.0 motor with 2.0 injectors? I do not have the 2.0 ECU.

Posted by: SirAndy May 10 2011, 01:52 PM

QUOTE(john d. collard 914 @ May 10 2011, 12:19 PM) *

I am putting a 1976 2.0 into my 1973 1.7. The manual says there is only slight modifictions to the D-jetrronic system, can I use my 1.7 ECU with the 2.0 motor with 2.0 injectors? I do not have the 2.0 ECU.

I'm pretty sure it will fire up and run, but how good is anyone's guess. confused24.gif


I used a 1.7L D-Jet system on a 1.8L motor and it ran just fine.
popcorn[1].gif

PS: welcome.png

Posted by: poorsche914 May 10 2011, 02:08 PM

Try http://members.rennlist.com/pbanders/djetparts.htm for all your d-jet questions

driving.gif

Posted by: Drums66 May 10 2011, 02:55 PM

......I'd say it's doable......with a hiccup or 2 flag.gif
bye1.gif popcorn[1].gif

Posted by: Jeff Bowlsby May 10 2011, 03:17 PM

The 73 1.7L ECU was the same as used on the 73 2.0L, that and the 2.0L injectors should be fine.

But the rest of your 1.7L system will not be sufficient.

Are you going to use the 76 2.0L intake system? Which FI harness? Which MPS? Which sensors? Use Brad Anders webpage to review teh parts you'll need.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)