For those of you who follow such things, my car did not make it to Hershey last month. I got it all together with a day to spare, took it or a test drive, and it was a total dog. Clearly running on three. I was stressed (just lost my grandfather and started a new job) so I made the executive decision not to give a fuch, drive my honduh to the event and drink and have a party.
Which I did.
Excessively.
Some of you may also remember that while I was fixing the car, I did a compression test, and the tester got stuck in the cylinder. I did surgery, and things were fine a few days later. Or maybe not so much.
I had an evening to dig into my car. One of my plugs looked... weird. Figured I had cross threaded it, and that was the cause of the dead cylinder.
Not so much. Check THIS out.
Oh yeah, I rock so hard it hurts sometimes.
Zach
Ruined a brand new, hard to find (impossible to find locally) NKG b5es spark plug to.
Aaaaaaaaaamazon! To the rescue!
But, I did get the rest of the compression tester out of the cylinder...
Zach
That spark has to travel a LOOOOOONG way
You drop compression as well. Dumb ass
Thanks for sharing so we may point and ridicule I am sure I will have something to compete in the near future.
Oh ya, people like you should have to be licensed to use a 13mm wrench
Ah well. I live my life as an example to others...
Even the idiots occasionally prove useful.
I need more beer right now.
Zach
Awesome!
BTW you can get those plugs at most any good bike shop.
Cheers! You and me are brothers from different Mothers!!! I just installed the oil pump on my Suby motor and realized that I didn't install the special order O-ring. Of course, it woulda been handy to realize that before I also installed the new water pump.
D'oh!!!
O'Reilly's carries the NGK plug and also lawnmower shops.
Ah well. We're all entitled to a few dumbass moments. The trick is not making the same mistake a second time.
Man you musta been someplace else when you did that. Glad it worked out.
Im laughin with you brother....
My latest moment was when I adjusted the valves... put the valve covers in the garage while I had a snack... came back outside fired it up and tried to pull out of the driveway
Man did it run like sh@#$
So I assume you took the 914 to work today
Funny man, Joe. Funny man.
I have not had time to get to the garage since Friday night.
But I did get the old Eurorace header off, the SSI's cleaned up, the carbs off and Chris's cable carb linkage is ready to go on.
If I can get a solid weekend, it should be driving again. Otherwise, its going to take several tired friday evenings and maybe a saturday mixed in there somewhere (if I can find the saturday...)
For once I think I actually have all the parts I need to do the job, excepting time.
Zach
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)