Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ DUI distributor for Type IV's???

Posted by: Mueller Jun 2 2004, 02:13 PM

Anyone try one of these yet?

The Type I and Type IV distributors are interchangable correct??

http://www.performancedistributors.com/vwdui.htm

IPB Image

Posted by: Tom Perso Jun 2 2004, 02:37 PM

Yes, they will fit. Question is how the advance curve is setup.

The Mallory barely clears the T4 tin - I don't know how well that monster would clear though.

Be interesting to see. Nice idea with the GM cap - easy to find new parts.

Tom

Posted by: tat2dphreak Jun 2 2004, 02:39 PM

and they are more expensive than the mallory... <_<

Posted by: lapuwali Jun 2 2004, 03:46 PM

DUI...not a good name. Makes on think they're assembled by people who are stoned out of their gourds.

Posted by: Mark Henry Jun 2 2004, 03:56 PM

QUOTE(Tom Perso @ Jun 2 2004, 12:37 PM)
The Mallory barely clears the T4 tin - I don't know how well that monster would clear though.

Good point Tom!

Says "To facilitate the installation of the VW DUI, an electric fuel pump and fuel pump block off plate are required."

That means it won't clear a T1 stock pump. You might need to do some major smash.gif

Posted by: jkeyzer Jun 2 2004, 04:00 PM

DUI Distributor for many vehicles:


Attached image(s)
Attached Image

Posted by: carr914 Jun 2 2004, 05:18 PM

MSD has a distributor that might be an option. Been running them on my 2.0 liters for 10 years without a single problem and they cured all the glitchs I had with the 2 different carbs setups I've had.
T.C.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)