Is there a way to tap into the block , maybe an oil filter adapter , so that one could add an oil cooler.
I sometimes have to use the teeener to go to the valley and the oil temp gets WAYYYY too hot for me
thx in advance
P.S. welcome to the USA Jeron!
JT
The sandwich adapter is easy but it restricts flow to about 5/16". We removed the filter plate and taped directly into the block for AN_8 fittings. This will allow for greater flow at same pressure.
L. McC
Hi JT,
I have oil filter mounted thermo-bypass for an oil cooler that I got from Shad Laws. Turns out I don't need it. Let me know if you are interested. I can get a picture for you. ghiafab@msn.com
John www.ghiaspecialties.com
JK
Shoot me a picture and a price. Will I still need the sandwich plate ?
thank for the replies
JT
p.s.
I'm going for a drive
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)