Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Type IV on an engine stand

Posted by: seanery Jun 3 2004, 09:28 AM

I've got the transmission off and I'm looking at what's left. How much of it needs to come off to get it on a stand?

thanks!

Posted by: synthesisdv Jun 3 2004, 09:31 AM

if the tranny is off, then that is it, bolt it up.

i removed alot of the other ancillary parts to keep the weight down, looked like my $30 motor stand was gonna snap.

dr

Attached image(s)

Posted by: ! Jun 3 2004, 09:32 AM

If you are going to split the case....flywheel.

Posted by: tracks914 Jun 3 2004, 09:50 AM

QUOTE(mikez @ Jun 3 2004, 07:32 AM)

If you are going to split the case....flywheel.

Take the flywheel off first, I didn't and regretted it later. Other than that, depending on how strong your stand is, you can leave it all on.

Attached image(s)