Printable Version of Topic

Posted by: mrgjones May 24 2011, 11:07 PM

1975 2.0. No spark coming from the coil. Found what I think is the lead coming from the relay panel but no still no joy. What's supposed to be hooked up to the coil? Thanks for your time.

Posted by: Tom May 25 2011, 01:23 AM

You need switched 12 volts ( not sure of the color) to positive side of coil, a black purple(tach) and a green (distributor) to the negative side of coil.
Tom

Posted by: vsg914 May 25 2011, 06:35 AM

Black wire coming from the same part of the harness as the bl/pur, and green. The black wire goes to the coil.

Posted by: mrgjones May 25 2011, 08:40 AM

Alright, I'll check that out. I remember seeing a diagram of the relay board but can't seem to find it again. Anybody? Thanks again. Vsg914 I just noticed your member number. That's quite auspicious in these end times.

Posted by: Tom May 25 2011, 10:23 AM

Here is a thread that has a relar board dia. Post #17
http://www.914world.com/bbs2/index.php?showtopic=127060&hl=relay+board
Tom

Posted by: mrgjones May 25 2011, 01:54 PM

Thanks Tom. That should help quite a bit.

Posted by: vsg914 May 26 2011, 06:16 AM

QUOTE(mrgjones @ May 25 2011, 09:40 AM)

Alright, I'll check that out. I remember seeing a diagram of the relay board but can't seem to find it again. Anybody? Thanks again. Vsg914 I just noticed your member number. That's quite auspicious in these end times.