Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ VDO Oil Pressure Adapter Hose
Posted by: 76-914 Jun 15 2011, 08:02 AM
Who has the VDO oil pressure relo hose #150 752D? 
PP mentions them but no listing and German Supply is out of stock. TIA
Posted by: tradisrad Jun 15 2011, 08:24 AM
Who has the VDO oil pressure relo hose #150 752D?
PP mentions them but no listing and German Supply is out of stock. TIACALL Rich at HPH 650-364-6234. I have read that others are using paint ball hoses.
Posted by: tomeric914 Jun 15 2011, 09:05 AM
http://aircooled.net
Posted by: 76-914 Jun 15 2011, 09:40 AM
http://aircooled.net
Nope, at least not metric, anyway. They only stock the 1/8" npt style, currently.
Posted by: underthetire Jun 15 2011, 11:09 AM
I used a grease gun hose from ACE hardware.
Posted by: r_towle Jun 15 2011, 11:18 AM
stainless wrapped air line from a paint ball gun looks better...just find a paint ball store.
rich
Posted by: retro74 Jun 15 2011, 12:08 PM
Here is a kit that does it all and it is inexpensive for what you get.
http://store.42draftdesigns.com/VW-Oil-Pressure-Relocation-Kit_p_314.html#
Posted by: tomeric914 Jun 15 2011, 01:14 PM
http://aircooled.net
Nope, at least not metric, anyway. They only stock the 1/8" npt style, currently.
Oh, yep, my bad. I bought 3 metric ones from John, the last one being a couple years ago. Thanks for correcting me!
Posted by: Cap'n Krusty Jun 15 2011, 04:45 PM
Remember, it's 10mm x 1 TAPERED thread, NOT conventional 10x1 straight thread. It's virtually indistinguishable from 1/8 NPT. You could probably cut both with the same tap and never know the difference. The 10mm x 1 straight thread is used in more modern applications, and always with a copper washer. Typical VDO dual post senders for our application have tapered threads and should not be used with adapters having straight 10mm x 1 holes. I suggest a grease gun hose, because they're cheap and readily available. They normally withstand 1500-3000 PSI, so they're substantially overengineered for this use. As always, you'll have to ground the sending unit in order for it to work properly.
The Cap'n
Posted by: Racer Chris Jun 15 2011, 06:12 PM
Remember, it's 10mm x 1 TAPERED thread, NOT conventional 10x1 straight thread. It's virtually indistinguishable from 1/8 NPT. You could probably cut both with the same tap and never know the difference. The 10mm x 1 straight thread is used in more modern applications, and always with a copper washer. Typical VDO dual post senders for our application have tapered threads and should not be used with adapters having straight 10mm x 1 holes. I suggest a grease gun hose, because they're cheap and readily available. They normally withstand 1500-3000 PSI, so they're substantially overengineered for this use. As always, you'll have to ground the sending unit in order for it to work properly.
The Cap'n
grease gun hose available at any flaps
Posted by: r_towle Jun 15 2011, 06:20 PM
again...paint ball gun hose.
Its NPT, it fits, and it does not look like a grease gun hose.
As always, ground the sender.
Rich
Posted by: 76-914 Jun 16 2011, 08:53 AM
Thx Cap't, Rich 'n Chris. It all makes sense now. The black grease gun hose will match my color scheme, also. Thanks a bunch guys.
Posted by: Cevan Jun 16 2011, 09:16 AM
again...paint ball gun hose.
Its NPT, it fits, and it does not look like a grease gun hose.
As always, ground the sender.
Rich
+1 on the paintball hose. My local store had different lengths so I got one that fit perfectly. I made a metal bracket that attached to the case with one of the case bolts. This way, it was self-grounding, no separate ground wire needed.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)