Printable Version of Topic

Posted by: PanelBilly Jul 27 2011, 08:15 AM

Originally I thought the bolt was just missing, but the board doesn't look like it ever had a bolt in it. The cover does have a hole for the bolt. Maybe it's the wrong cover

Posted by: 76-914 Jul 27 2011, 08:26 AM

The relay cover w/o the bolt is held in place by the regulator. It is installed after the cover is put on.

Posted by: jcd914 Jul 27 2011, 08:29 AM

I don't know when they changed but early boards and covers used the bolt and latter boards and covers did not. If you seal the hole on the early cover and you can use it on a late board, the cover just sits on the board.

Jim

Posted by: AZ914 Jul 27 2011, 08:37 AM

Mine just fit tight over the relay board and regulator. It wasn't going anywhere.

Posted by: ConeDodger Jul 27 2011, 08:39 AM

Big rubber band. Oh, and I'm not kidding. It goes under the relay platform and loops over the top of the cover when it is in place. But you can just set it on there. The voltage regulator pretty much holds it in place.

Posted by: John Jentz Jul 27 2011, 10:31 AM

You have a 75/76 board, with an early cover. The late board had a cover without the hole. Friction holds it on.

Posted by: vsg914 Jul 27 2011, 10:56 AM

John nailed it, and its NOT held on by the voltage regulator.

Posted by: Drums66 Jul 27 2011, 04:25 PM

......Something like this......easy access