Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Throttle cable

Posted by: Java2570 Aug 5 2011, 07:29 PM

Got a 74 2.0L with stock Djet.....

How much play or slack should be normal for my throttle cable? Mine doesn't seem abnormally loose or tight but I have a little problem with my revs dropping at idle when I feather the throttle; it acts like it wants to die. It is much more pronounced when the engine is "cold" or right after starting. I haven't checked the throttle body or much of anything yet.
I plan on going through the EFI components soon to test their function; they all were tested by the previous owner and were known to be good at that time; however, things do change without warning. Any ideas on where I should start as it could be a lot of different things......?

Posted by: underthetire Aug 5 2011, 07:47 PM

Think your aar isn't working if it does it right after starting cold. The engine should be ~1500-1800 rpm on cold starts, dropping over the next 5 minutes or so to 950. Throttle cable should just be loose enough not to bind when closed.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)