Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ valve adjustment

Posted by: sanman Jul 2 2004, 02:45 PM

Helo everyone. I need to get a second opinion other than mine. I have a 1970 914 with a 1.7 case and 1.8 pistons and heads I have no clue of the cam.
I set the valves at .006 ex and .008 in. Will I be ok?
I would like to start the car tomorrow and was was wondering what should I go by 1.7 or 1.8 recomendations for valve adjustment. idea.gif

ps The car is carbed.

Thanks in advance.

Posted by: tat2dphreak Jul 2 2004, 02:49 PM

I think the settings are all the same.. .006 for all 914 engines... and yes you'll be fine at .006 or .008

Posted by: sanman Jul 2 2004, 02:53 PM

In the Haynes Book and in the pp tech article it list
.006 in and ex for 1.7
.006 ex and .008 in 1.8

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)