Printable Version of Topic

Posted by: r_towle Aug 12 2011, 02:21 PM

Does anyone know of a US based retailer that sells the 1.8 liter APC heads, the new castings?

Rich

Posted by: 904svo Aug 12 2011, 02:52 PM

Jake does, don't know if he sells them without going to Len first.

Posted by: bobhasissues Aug 12 2011, 03:08 PM

Don't know about 1.8 APC but do know 2.0 AMC are available at a lot of places. DRD Racing heads has the 2.0 with or without customizing options.

Posted by: HAM Inc Aug 12 2011, 03:28 PM

I can get 1.8 amc heads from time to time. They are not always available stateside.

Posted by: stugray Aug 12 2011, 03:36 PM

I am also curious who can get the NEW castings other than Jake.

I have a hard time believing that he has his own 'exclusive' supplier that only provides them to him.

Stu

Posted by: HAM Inc Aug 12 2011, 03:39 PM

Plenty of retailers out there that sell new amc castings. Not so many folks out there who replace the garbage they pass off as seats, guides, valves and retainers.

Posted by: Jake Raby Aug 12 2011, 06:44 PM

QUOTE(HAM Inc @ Aug 12 2011, 02:39 PM)

Posted by: stugray Aug 12 2011, 08:21 PM

Yeah, I re-read the whole write-up on Jake's site.

I see now that the castings are readily available as new, but Jake does a LOT of stuff to them after he gets em.

Stu

Posted by: Jake Raby Aug 12 2011, 08:30 PM

Actually Len does it for me... We developed the program closely together, you can only get those bad boys from me :-)

Posted by: r_towle Aug 12 2011, 10:17 PM

do you sell just the new heads with no work done on them?
if so, what would be the cost?
looking for four heads.
Rich