Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Headlight motors, one is balky....

Posted by: ! Jul 6 2004, 09:56 AM

I had a good set for years....finally threw them away as no one wanted them and was tired tripping over the damn things.....so of course NOW I need one....I think....

The passenger side one refuses to go up without a tiny nudge/touch on the plastic knob on the rear of the motor....then it won't go the max height without a little more help from the knob.

Any ideas on fixing them? I tried the BFH tap trick on the motor housing like I use on the starter solenoids....no go....

Posted by: ! Jul 6 2004, 02:14 PM

What? No one ever had this problem?

I just ordered some new H4s and would like to fix it or replace the motor when I do the install....

Posted by: SirAndy Jul 6 2004, 03:39 PM

QUOTE(mikez @ Jul 6 2004, 01:14 PM)
What? No one ever had this problem?

i had. turned out it was the relay ...

try switching with the other side ...
Andy

Posted by: Dave Bell Jul 6 2004, 05:26 PM

Mike -

If you need another headlight motor, let me know, I probably have a few lying around.

I can either just give it to you or trade straight across for that V8 914 you are trying to unload.

- Dave

Posted by: ! Jul 6 2004, 05:47 PM

I;ll try Andy's suggestion and if that don't work I'll hit ya up....thanks.

Posted by: Eric_Shea Jul 6 2004, 07:22 PM

I've got a pair as well if the relay doesn't work.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)