Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Front Turn Signal Wiring Help

Posted by: Eric_Shea Jul 7 2004, 02:18 PM

Hi Gang,

I'm bolting the ride back together today and I need to know where the wires go on the front turn signals. I've got three wires:

Brown Ground
Grey with Black Stripes
Black with White Stripes

I've got three terminals:

BL
31 and,
57

Anybody??

Many thanks in advance!

Posted by: SirAndy Jul 7 2004, 02:20 PM

i'm at work right now (car's @ home) ...

i can take pics later if no one has responded by then,
Andy

Posted by: Eric_Shea Jul 7 2004, 02:26 PM

Thanks Ähndie

Posted by: Deluxe247 Jul 7 2004, 02:36 PM

This should do it...

IPB Image

Posted by: Eric_Shea Jul 7 2004, 02:41 PM

A newbie with a first post saves my ass. Welcome to the board and many, many thanks!

Posted by: Jeff Bonanno Jul 7 2004, 02:44 PM

Ya, welcome Deluxe!

Posted by: Deluxe247 Jul 7 2004, 02:45 PM

No prob. Been lurking for a while now. cool_shades.gif I figure I might as well help someone else out for a change.

Posted by: Eric_Shea Jul 7 2004, 03:49 PM

And help you did...

My left isn't working the way it should but my right side is. I think it's something else at this point.

Left works as a parking light with the key out but not as a flasher with the key on confused24.gif

Both rears flash just fine.

Posted by: Deluxe247 Jul 7 2004, 04:04 PM

I would check the bulb(s) in the side that is not working. Make sure they are not burned out in anyway...

Someone else might have to chime in if that isn' t the case.

Posted by: Eric_Shea Jul 7 2004, 04:14 PM

replaced the bulb... same prob. I'll find it some how or another. If anybody has any other ideas let me know.

Thanks again for your diagram.

smilie_pokal.gif

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)