Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Help needed with 914 high beams

Posted by: PBC914 Aug 18 2011, 01:51 PM

I have a 75 1.8 that I thought was having an issue with the fog lights. Until I realized that the reason the fogs weren't working while the headlights were on, is that the fog lights don't work with the high beams on.

When the headlights are turned on, I cannot switch off the high beams using the turn signal. The high beams remain on all of the time. It won't click on or off.

Any ideas? Is the turn signal arm possibly broken?

Posted by: kg6dxn Aug 18 2011, 02:22 PM

Bad hi/lo relay. The fog lamp relay gets its ground from the High beam hot. But only when the high bean is off. I beleive its a blue/white or white/blue attached to the high beam fuse. If you ground that wire the fogs will work with both high and low.

Posted by: PBC914 Aug 18 2011, 02:23 PM

Thanks for the quick reply!

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)