Howdy all,
i been having trouble with the foglight rewire tick (running foglight with the headlights down) can anyone explain it to me again?
the fogs are powered off the low beam fuse. I use driving lights so I switched the leads to the high beam fuses.... I'd imaginge just find the fuse that's hot with the key on and you're good to go.
If you don't mind spending 25 bucks, the Jwest kit is really nice. Good instructions as well. I do like the flash to pass feature as well.
http://members.rennlist.com/demick/fogrewire.html
Cheers
That's those are the instructions I used. My fogs can be used with or w/o the headlights being on. Also if the fogs are on by themselves, pulling back on the turn signal stalk turns them off momentarily to "flash" other drivers. They will also turn off if the high beam headlights are engaged. Perfect for my needs.
Is there a wiring diagram available showing how the JWest fog light flash is installed ? I bought one used at the G & R swapmeet, but the instruction were gone.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)