Printable Version of Topic
914World.com _ 914World Garage _ Are you running ATS 7x15 on your 914?
Posted by: draganc Aug 29 2011, 11:47 AM
Hi,
I have a set of ATS 7x15 with 30mm offset and was wondring if anyonw is using the same rims on a narrow body?
Any information/pictures are apriciated.
Thanks,
Dragan
Posted by: campbellcj Aug 29 2011, 09:36 PM
QUOTE(draganc @ Aug 29 2011, 10:47 AM)
Hi,
I have a set of ATS 7x15 with 30mm offset and was wondring if anyonw is using the same rims on a narrow body?
Any information/pictures are apriciated.
Thanks,
Dragan
Are you talking about the Cookie Cutter wheels (5-lug), or some other type? I do not recall the offset on cookies but many folks including me have used them successfully. I used 205/45 Kumho V-somethings as I recall, probably V700 Victoracers. It's been a while.
Posted by: ConeDodger Aug 29 2011, 11:44 PM
205 50 15 is pretty much the limit. Hoosiers in that size will not work. Your rear fenders could need rolling.
Posted by: draganc Aug 30 2011, 08:31 PM
Nope no cookie cutters.
Here a pic that I have found online:
Posted by: draganc Aug 30 2011, 08:33 PM
one more. I'm playing with the thought to have them painted fake mag/gold:
Posted by: jimkelly Aug 30 2011, 08:39 PM
those are probably not 7" wide - 5.5" i think.
Attached image(s)
Posted by: underthetire Aug 30 2011, 09:42 PM
I'm running 16x7 late offset dials if that helps. 205/50 with 1 1/4 spacer. It's mighty close in the rear on a narrow body.
Posted by: racerbvd Aug 30 2011, 10:39 PM
Here is what 7s look like..
Posted by: bernbomb914 Aug 31 2011, 06:37 PM
I run 205x15 on 6" width and thet barely clear
Posted by: r_towle Aug 31 2011, 07:17 PM
Its interesting , but 6 inch wheels fit worse than 7 inch wheels with 205/50's
The 7 inch wheels allow the sidewall to be more vertical.
The rubbin gon the rear can be cured with a little rolling of the lower fender lip.
The front wheels will rub on full lock on the inside...but spacers can cure that.
Rich
Posted by: draganc Sep 1 2011, 02:48 PM
QUOTE(racerbvd @ Aug 30 2011, 08:39 PM)
Here is what 7s look like..
Bryon,
What size tires are those on the green car?
Just for clarification, I have 7x15 ET30, it's stamped on the rim.
Thanks,
d
Posted by: shuie Sep 1 2011, 04:20 PM
That car has 205/50/15 Hoosiers on all 4. The fenders are pulled and rolled. The car is slightly modified
These are very cool wheels. Surprsingly lightweight.
Posted by: RON S. Sep 2 2011, 07:31 AM
They are nice looking wheels.
i have 5 of these 7''rs sitting in my shed, that were on my 914/6 when I first bought it back in the 90's.
A 914 has to have flares, and 5 lugs to make these work.
Ron
Attached image(s)
Posted by: shuie Sep 2 2011, 03:07 PM
Here's a 7x15 with the 4x130mm lug pattern
Posted by: tavoman27 Sep 3 2011, 12:32 AM
QUOTE(draganc @ Aug 29 2011, 10:47 AM)
Hi,
I have a set of ATS 7x15 with 30mm offset and was wondring if anyonw is using the same rims on a narrow body?
Any information/pictures are apriciated.
Thanks,
Dragan
205-50 is all you can fit on a narrow body, the rear lips need to be rolled a tiny bit... 944 front 8x16 fuchs work great on the front but nothing bigger than 7 can be used on the rear for a narrow body 914.
Posted by: draganc Sep 5 2011, 01:06 AM
QUOTE(shuie @ Sep 2 2011, 01:07 PM)
Here's a 7x15 with the 4x130mm lug pattern
Yeap, that's what I have :-)
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)