Small amount of fluid coming from rubber plugs that connect the line to the mc. System has been dry for awhile. I thought it was coming from the copper washers but I replaced them and it's still forming drops
Itg looks like I need to replace the rubber stopper where the tube comes in from the reserve. Anybody have any hints at the simplest way to do this?
Doing that now - actually replacing the MC. There is NO easy way. Those puppies are the worst part of the MC swap. Best advice I got from previous threads was to disconnect the reservoir so you can pull the MC down where you can get at the top of it.
Pelican parts tech write up - http://www.pelicanparts.com/techarticles/914_replace_master_cylinder/914_replace_master_cylinder.htm
its like trying to explain alligator wrestling...
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)