CSOB style
I made a bracket from angle iron that attached to the pass side carb and used the 4 cable. Worked great.
Van
I made a cheesy little bracket to hold my cable on my 3.6
since I flipped my manifold around, I basically had to start from scratch.
I fabbed up the bracket from a bicycle cable retainer if I remember, and then bought a custom length cable from Pegasus Auto Racing.
All told, less than 100 bucks complete. Works like it's supposed to.
Ron
Attached thumbnail(s)
Nice! Van do you have any pictures?
On my 3.2 I used the Patrick conversion cable.. it is basically just a longer cable with some heat shielding that loops up around the motor and thru the tin. It has a support that attaches to the engine/trans bolt.
Thanks Jason, I will have to search PMSs site.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)