Posted by: rwilner Sep 26 2011, 03:15 PM
This is the pin and flap in the fan shroud / impeller housing that feeds the branch pieces.
Mine's missing on the passenger side.
Anyone know where I can get one? anyone have any luck fabricating one?
Also, anyone know where you can get the gaskets that go between the impeller housing and the branch pieces, or have you fabricated something that works?
thx!
Rich
Posted by: 76-914 Sep 26 2011, 03:21 PM
QUOTE(rwilner @ Sep 26 2011, 02:15 PM)
This is the pin and flap in the fan shroud / impeller housing that feeds the branch pieces.
Mine's missing on the passenger side.
Anyone know where I can get one? anyone have any luck fabricating one?
Also, anyone know where you can get the gaskets that go between the impeller housing and the branch pieces, or have you fabricated something that works?
thx!
Rich
Rich, I've got one left over. I can't remember if they are different for each side or not, though. pm tonite w/ a reminder and I'll send you a pic. Free + shipping. let me know. kent
Posted by: r_towle Sep 26 2011, 04:38 PM
Rich,
I have no idea what you are talking about...
BUT
I have them, free for the taking.
Rich
Posted by: nathansnathan Sep 26 2011, 04:42 PM
They are different, 1 side from the other. 1 is taller.
Posted by: vsg914 Sep 26 2011, 04:58 PM
Drivers side is the short one. Easy to make with some soft aluminum.small nail our cotter key makes a good pin
Posted by: Racer Chris Sep 26 2011, 05:27 PM
Rich, I don't have any of the flaps but I can supply an inexpensive alternative to the repro seals for the branch pieces.
Posted by: bigkensteele Sep 26 2011, 06:22 PM
QUOTE(Racer Chris @ Sep 26 2011, 03:27 PM)
Rich, I don't have any of the flaps but I can supply an inexpensive alternative to the repro seals for the branch pieces.
Chris, I would sign up for pair of the seals as well. I didn't see them on your site. Are they a regular item?
Posted by: 76-914 Sep 26 2011, 06:27 PM
Oops, I replied in the classified so this is a double post. Is this it?
Posted by: rwilner Sep 26 2011, 06:56 PM
QUOTE(76-914 @ Sep 26 2011, 08:27 PM)
Oops, I replied in the classified so this is a double post. Is this it?
Kent
That is exactly what I need. I can't believe you have one of these. Why do you have this??
I love this place...
PM'd my address to you. You have earned your good karma for the week.
Posted by: 76-914 Sep 26 2011, 09:07 PM
Your welcome, goes in the mail tomorrow. It qualified as a letter, .44 cents.
Posted by: Kirmizi Sep 26 2011, 10:49 PM
Oooooh, please tell me you didn't just throw that in a letter envelope and mail it.
The automation (mail sorting machinery) at the PO just loves that stuff.
Mike
Posted by: dflesburg Sep 27 2011, 07:36 AM
I made some with a pair of snips and a stainless steel paper clip
Posted by: Racer Chris Sep 27 2011, 12:08 PM
QUOTE(bigkensteele @ Sep 26 2011, 08:22 PM)
QUOTE(Racer Chris @ Sep 26 2011, 03:27 PM)
Rich, I don't have any of the flaps but I can supply an inexpensive alternative to the repro seals for the branch pieces.
Chris, I would sign up for pair of the seals as well. I didn't see them on your site. Are they a regular item?
Since I saw the price for replacements at AA I thought about it a couple times but haven't gotten around to putting it on the website.
I can supply silicone adhesive backed strip material, enough for both sides, for $5 plus postage.