Is it common for there to be a lot of rust at the front jack stand donut(or whatever its called) on the drivers side? I did some rust raiding today and found that it is almost completly rusted through.
What is the best way of repairing this?
I'll post some pictures as soon as I can
Yep, the donuts rust easily, cause they are basically open cavities that will fill with crap and trap moisture
Also by using them, the paint gets damaged, so that's a win-win situation (for rust)
Best way to fix them is to grind off all the rusted metal and weld in new pieces
Dunno if these are available, so you may have to fab new donuts...
cheers,
Jeroen
Thank you, thats good to hear.
Yes new ones are available from restoration design.....easy fix...not so easy to fix the rust under the other side (battery)
Attached image(s)
Hello,
this is what my driverside donut looked like. the donut is strong but the panel was rusted through.
Attached image(s)
cut the whole shit out and fixed it with fresch metal
Attached image(s)
...fresh...
Attached image(s)
doing some welding
Attached image(s)
metallwork
metallwork
Attached image(s)
and again welding
greetings
Attached image(s)
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)