Today I started body filler work on my GT6. Lots of cheese grating and sanding but things are looking good [for an amatuer]. The attached photo is what I am starting with. I will do some after shots in a day or two before we prime.
This photo shows the wheel arch I had to pull out with a stud welder..that was challenging but fun.
Attached image(s)
And here is the rear end. We discovered the car had been hit and was in about 1 " or so and instead if pulling it out the PO just filled her up with Bondo..this is where I learned to use a dolly and hammer. The center section had a "tin can" effect and it took a lot of gentle persuation ...and patience.
Attached image(s)
Real Men do thier own body work.
Looks great. That much exposed metal makes me scared. With all the rain we've been having, I like to see some primer on it.
Paul
Yes...I know but my body guy insists I get the filler on the metal first and any surface rust can be removed before we prime. It's just spotty...from sweat!
I should have the body primed by Friday
Body work and primers:
Attached image(s)
rear started too:
Attached image(s)
Those are some purdy wheels to be doing bodywork around them!!!
Regardless, looks nice dude!
Tom
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)