Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Brake pedal to master cylinder push rod -Source?
Posted by: Nicky Oct 6 2011, 06:05 PM
Is there a source to get a new, or used, brake pedal to master cylinder push rod? Or, do I need to put a WTB in the classifieds? I replaced my master cylinder and found mine to be bent. So, I figure I should take care of that too. I've searched the forums here for info, and checked Stoddard, Pelican, and Auto Atlanta. Not sure if I'm searching wrong, or its just not available anymore. Thanks.
Posted by: Rotary'14 Oct 6 2011, 06:13 PM
Is there a source to get a new, or used, brake pedal to master cylinder push rod? Or, do I need to put a WTB in the classifieds? I replaced my master cylinder and found mine to be bent. So, I figure I should take care of that too. I've searched the forums here for info, and checked Stoddard, Pelican, and Auto Atlanta. Not sure if I'm searching wrong, or its just not available anymore. Thanks.
I bet "Bdstone" has some. If he doesn't drop in on this thread I suggest you PM him.
-Robert
Posted by: wingnut86 Oct 6 2011, 06:34 PM
There's also the "Brake Shaman", Eric Shea 
Posted by: ArtechnikA Oct 6 2011, 06:36 PM
I've always just used a cylinder head stud, cut to length and end radius ground on a bench grinder...
Posted by: pilothyer Oct 6 2011, 07:08 PM
or.................just straighten that mother out......... 
Posted by: Nicky Oct 7 2011, 04:50 AM
I've always just used a cylinder head stud, cut to length and end radius ground on a bench grinder...
Yeah, someone else told me to do that. I figured I'd try to find one if I could first.
I didn't want to mess around with bending it back if I could get one, I'd rather make one than that.
Posted by: jimkelly Oct 7 2011, 05:12 AM
like this one ; )
$10 ??
jim
Attached thumbnail(s)
Posted by: Nicky Oct 7 2011, 05:16 AM
like this one ; )
$10 ??
jim
Not bent right? I'll take it. I'll PM you.
Posted by: jimkelly Oct 7 2011, 05:29 AM
more pics
lets see a pic of your bend
Attached thumbnail(s)
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)