The last couple a days Punkin has been missing intermittently. It seems to run on 3 when first started in the morning. Runs better as it warms most of the time. Actually #3 seemed to be the culprit cuz I pulled the connector off the injector & there was no difference.
I found the blade/spade connector of the CHT had come unwrapped & was against the tin (this being beside #3). Will this be cause for poor running?
.........b
I think I'm gonna try a different TPS. I can be driving along at 3K and it will chug every once in a while or feel like the fuel has been cut. Had this prob on the 1.7 & the TPS cleared it up.
........b
Sounds to me like the number 3 injector is the cuplrit...
Flip the injectors wires from 4 to 3 and run it.
B
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)