Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Looking for some help in the BAy area
Posted by: PanelBilly Oct 9 2011, 06:07 PM
I need a gas cap for '74! I guess I didn't bend the tabs far enough back after I had it re zinc'd and it won't stay in place. I want the new owner to send it back, but I'm looking for one to seal it up. I assume all but the threaded ones are the same.
They are also having problems with the passenger window. It got stuck in the down position. I told them to crank a little harder and that worked, But The cover should be pulled and the gear checked. I think a little grease is all that's needed.
Lastly, (I hope) I left the venting to wide and the e brake won't hold steep hills. I fingured it was fine, but the new owner wants to use it for a hill holder.
Anybody want to do some work on a nicely restored teener?
Posted by: SirAndy Oct 9 2011, 06:16 PM
I need a gas cap for '74! I guess I didn't bend the tabs far enough back after I had it re zinc'd and it won't stay in place. I want the new owner to send it back, but I'm looking for one to seal it up. I assume all but the threaded ones are the same.
They are also having problems with the passenger window. It got stuck in the down position. I told them to crank a little harder and that worked, But The cover should be pulled and the gear checked. I think a little grease is all that's needed.
Lastly, (I hope) I left the venting to wide and the e brake won't hold steep hills. I fingured it was fine, but the new owner wants to use it for a hill holder.
Anybody want to do some work on a nicely restored teener?
PM McMark, his shop is just north of San Francisco ...
Posted by: dlkawashima Oct 10 2011, 11:38 AM
If McMark doesn't have it, I would think that Easy Porsche in Emeryville would:
http://www.easypor.com/contact.htm
Posted by: JRust Oct 10 2011, 11:55 AM
PM McMark, his shop is just north of San Francisco ...
. McMark has LE experience too 
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)