Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Advise anyone?

Posted by: ILM914 Oct 28 2011, 10:10 AM

Hi folks, I am replacing my windshiels and would like to add washers, can anyone recomend a washer system that is resaonably priced installed? Also my wipers are slow moving, and not really any difference from low to high speed. Any ideas why this is so? Thank you for the help everone, Joe

Posted by: StratPlayer Oct 28 2011, 10:34 AM

http://www.914world.com/bbs2/index.php?showtopic=13261

Posted by: dlee6204 Oct 28 2011, 01:16 PM

QUOTE
Also my wipers are slow moving, and not really any difference from low to high speed. Any ideas why this is so?



You could try lubricating all the joints and bushings on the wiper rack. This should help some.

Posted by: r_towle Oct 28 2011, 01:18 PM

lubrication and and electronic pump will help.

Most VW shops sell some electric pump that can be adapted.

Rich

Posted by: Cap'n Krusty Oct 28 2011, 01:51 PM

QUOTE(dlee6204 @ Oct 28 2011, 12:16 PM) *

QUOTE
Also my wipers are slow moving, and not really any difference from low to high speed. Any ideas why this is so?



You could try lubricating all the joints and bushings on the wiper rack. This should help some.


It's the shafts that need lubrication. It's uncommon to see the linkage be the cause of slow wipers.

The Cap'n

Posted by: Valy Oct 28 2011, 03:39 PM

look no further:
http://www.914world.com/bbs2/index.php?showtopic=117014

Posted by: ILM914 Nov 2 2011, 09:08 PM

QUOTE(StratPlayer @ Oct 28 2011, 08:34 AM) *

http://www.914world.com/bbs2/index.php?showtopic=13261



Thank you much very informative, where did you get the nice button/switch for the console? Thanks again, Joe

Posted by: ILM914 Nov 2 2011, 09:09 PM

QUOTE(dlee6204 @ Oct 28 2011, 11:16 AM) *

QUOTE
Also my wipers are slow moving, and not really any difference from low to high speed. Any ideas why this is so?



You could try lubricating all the joints and bushings on the wiper rack. This should help some.


Thank you sounds like a good idea

Posted by: ILM914 Nov 2 2011, 09:18 PM

QUOTE(Valy @ Oct 28 2011, 01:39 PM) *

look no further:
http://www.914world.com/bbs2/index.php?showtopic=117014


Thank you much appreciated

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)