Printable Version of Topic

Posted by: Verruckt Aug 2 2004, 05:57 AM

Im looking at a car... Its been smacked in the back obviously. Any thoughts on how difficult this would be to repair?

Posted by: Jeroen Aug 2 2004, 07:08 AM

That looks pretty f-ed up
Looks like it could very well have some structural damage, not just sheet metal...
Do the doors open and close?
Does the top still fit properly?

Depends on how desperate you are (or how cheep it is)

cheers,

Jeroen

Posted by: dflesburg Aug 2 2004, 07:37 AM

Looks to me like you need someone with a professional frame stretcher.

Pelican Parts has all the dimensions they would need. Definately not something to to at home.

Posted by: sanman Aug 2 2004, 08:19 AM

Posted by: JOHNMAN Aug 2 2004, 08:45 AM

HMM....

Is the passenger suspension console in tact, or is it torn off? It looks like the passenger wheel is out of align....


You would need to dig further to determine the actual damage.

Anything can be fixed with enough time and $$$$.

It would need to see a frame machine.

Is the car free? If so it may be worth fixing. Otherwise look for another tub.

Posted by: Jeroen Aug 2 2004, 08:53 AM

Hey, we have the dimensions right here on the site...
http://www.914world.com/specs/bodydims.php

Sometimes, remarks like this makes you wonder why we even bother putting stuff on this site...

cheers,

Jeroen

Posted by: DuckRyder Aug 2 2004, 09:08 AM

That is going to take a pro.

It better be free or close to free or a six to be worth fixin.

Posted by: Lawrence Aug 2 2004, 09:30 AM

I dunno where you are... but I think Brad knows a shop that speaks 914, that has a frame machine.

I don't think it's a /6. That looks like a 4 bolt wheel.

-Rusty

Posted by: Verruckt Aug 2 2004, 09:45 AM

Its an ebay special. So far it IS pretty damn cheap... Was just curious. If it needs stretching, then im not sure if its something I want to tackle.

Posted by: Andyrew Aug 2 2004, 09:49 AM

If it has really nice parts on it, then just find a decent body to transfer the parts to it...

If its just ok.. then leave it. Let some guy with a barn buy it and use it for a parts car.


There are better deals out there.

Posted by: SirAndy Aug 2 2004, 09:55 AM

Yeaman Auto-Body in Palo-Alto. the owner, scott, is a fellow 914 nut.
he has the *factory* jig for the stretcher and could get it straightend out.

if you want, call him up and find out what it would take ($$$) ...

Yeaman Auto Body
2025 East Bayshore Road
Palo Alto, CA 94303
Tel.: 650 328-8169


Andy

Posted by: Verruckt Aug 2 2004, 04:51 PM

Im in Kansas City. I know this car is in California. I just thought that if it were cheap enough... Besides the guy seems to be avoiding sending me pics of "certain areas"

I found a pretty decent 2 liter car two weeks ago. Someone abandoned it at a porsche shop about 4 months ago, not wanting to pay the bill. The shop owner is just not sure he wants to put a lien on it just yet. Hes been trying to get ahold of the guy...

Im just getting anxious to get another 14. The wife is cool with it, the garage has room, I have the money...

I should have bought Doug's car when I had the chance.

Posted by: GWN7 Aug 2 2004, 05:20 PM

Well the bumper and tail light assembly is 1K, not including what else it needs in parts (trunk hood? trunk gasket?) Add that to the body shop bill (unless you have a frame machine at home) and I'd keep looking.

Plus you would have to put the front end back together also. (if all the parts are there)

More pics http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=2485976262&category=6430

Posted by: Mueller Aug 2 2004, 05:30 PM

he calls that a dent???

hate to see him describe getting a leg cut off:"it's just a minor scrape"

it would cost too much to get it repaired by someone that knows what they are doing and you are paying them for it, you'd be looking at a few grand to do it even half-assed.