Printable Version of Topic

Posted by: jgiroux67 Aug 11 2004, 09:54 PM

Does anyone have any pics of a rear swaybar installation? Such as all the parts needed and also where exactly it needs to be mounted.

Posted by: Jeff Bonanno Aug 11 2004, 10:06 PM

Scott Kline will tell you not to weld upside down...

Posted by: Bruce Allert Aug 11 2004, 10:32 PM

Go here... Pics & text "How To"

http://www.pelicanparts.com/techarticles/914_rear_sway/914_rear_sway.htm

and good luck

.........b

Posted by: skline Aug 12 2004, 06:47 PM

I learn from my own mistakes, that was a hard one to learn. Put something over your chest and wear long thick sleeves when you weld in the brackets or put the car on a rotisserie.

Posted by: Britain Smith Aug 12 2004, 07:00 PM

One thing you can do is mount the bar upsidedown and it won't hit the underside of the trunk.


Attached image(s)

Posted by: Britain Smith Aug 12 2004, 07:00 PM

Mount Point


Attached image(s)

Posted by: Britain Smith Aug 12 2004, 07:01 PM

another...


Attached image(s)

Posted by: william harris Aug 12 2004, 07:10 PM

Someone please post pics of Reinforcing plates to weld inside rear trunk.

Posted by: Engman Aug 12 2004, 07:37 PM

Look here http://www.914world.com/bbs2/index.php?act=ST&f=4&t=7464 I make these and have them in stock.

Mark

Posted by: jgiroux67 Aug 13 2004, 01:27 PM

I have heard that it is bad to have a rear sway bar when you dont have a front one, is this true?
Where can i get the rear sway bar linkage bushings and how much are they?

Posted by: Engman Aug 13 2004, 02:18 PM

Do a search on rear swaybar. It all depends upon what you want to do with the car and what other mods it may have.

Mark