Printable Version of Topic

Posted by: Eric_Shea Dec 1 2011, 10:36 PM

...and I'll post them here:

http://www.pmbperformance.com/page/page/1492174.htm

So, if you're a customer, I'd love to post your ride on the site. Short description and a testimonial would be great.

Posted by: brant Dec 1 2011, 10:46 PM

you should just get a testimonial from Ron....

that means more than all of other testimonials combined!

Posted by: Eric_Shea Dec 1 2011, 10:57 PM

Ron or Slits?

Posted by: brant Dec 1 2011, 11:03 PM

good point..

do they cancel each other out if they both write something up?

Posted by: Eric_Shea Dec 1 2011, 11:06 PM

I probably wouldn't be able to post it if Slits wrote it.

Posted by: Jesse Dec 1 2011, 11:26 PM

Thanks for the break rebuild Eric they got here faster than i thought possible, they almost looked to good to put on my car, but i did and the instructions you sent were perfect the install and adjustment went smooth.
Thanks Jesse Mobile, AL

Posted by: Daiberl Dec 1 2011, 11:27 PM

Where do you want to send it to, just a reply here or via email?? Happy to send you a picture from the LE, your brake calipers look great on the car and work perfect!

- Juergen

Posted by: scotty b Dec 2 2011, 05:10 AM

Can I send it usps with the next box of calpers

Posted by: mepstein Dec 2 2011, 07:35 AM

Attached image(s)

Posted by: eric9144 Dec 2 2011, 09:53 AM

I'll work on a blurb and email you a picture...

The real problem is (refer to the slacker thread) my real picture is going would look almost just like mepstein's because they're not on the car yet...but they sure look sexy as hell in the boxes I've got them in

Posted by: eric9144 Dec 2 2011, 09:53 AM

BTW, if anyone is reading this who is not familiar with Eric's work, he is an amazing talent to the point of being an artist with what he does. There are a few people out there who go to lengths that Eric does both on his products and his willingness to provide information and direction with them.

Posted by: Jesse Dec 2 2011, 11:24 AM

Posted by: Eric_Shea Dec 2 2011, 01:10 PM

You can post them here...

Posted by: Ferg Dec 2 2011, 01:25 PM

I'll get a pic of the Blue one shortly

Posted by: ConeDodger Dec 2 2011, 01:45 PM

I have had a variety of PMB brake configurations on my 914 and 911, even my 240Z sports PMB rebuilds. They have never failed to be the best possible restoration/rebuild on the market. I will not get brake work or brake pads anywhere else!


Attached thumbnail(s)


Attached image(s)

Posted by: scotty b Dec 2 2011, 02:55 PM

Jimbo's 5 to four package. And for posterity....


Santa loves Eris Shea's package the most !!




Attached image(s)

Posted by: Cairo94507 Dec 2 2011, 03:26 PM

Here is a picture my little six when I got it

Posted by: Cairo94507 Dec 2 2011, 03:35 PM

And....how it presently sits:

Posted by: Eric_Shea Dec 2 2011, 05:58 PM

Updates added.

Thanks!

Posted by: Vacca Rabite Dec 2 2011, 09:01 PM

Shea brakes on all four corners. My car has zero issues locking them up if needed, even with larger then stock tires and a larger then stock engine.

And, yes, I DO still have a box full of cores for you.....

Zach

Posted by: Michael N Dec 2 2011, 09:43 PM

Stops better than factory. Wife loves her car more than before because of the brakes.

Posted by: zambezi Dec 2 2011, 10:49 PM

Eric rebuilt the calipers for this speedster.


Attached thumbnail(s)

Posted by: Eric_Shea Dec 3 2011, 12:43 PM

Thanks Jim... if you have any details about the car let me know and I'll add that to your photos.

Mike, great to meet you and your beautiful family at RR4. Please tell your daughter I'm sorry for stepping into her picture!

Posted by: Eric_Shea Dec 3 2011, 03:52 PM

Zach... almost missed your's on the previous page. Send cores! (you too Joe)

Posted by: carr914 Dec 3 2011, 04:31 PM

Posted by: Eric_Shea Dec 5 2011, 01:24 AM

Thanks T.C. On the site...

Posted by: Series9 Dec 5 2011, 08:58 PM

Me?

Yes, I have rears for Nelson headed your way this week. His fronts are from you. I'll clean them up and use them as-is.


I have used a bunch of your calipers. Liz, Nelson, Luckie, Steve, Wills......who else.

Posted by: tod914 Dec 5 2011, 09:23 PM

This one got calipers and brake lines all around. Great job on the plating Eric!

Posted by: tod914 Dec 5 2011, 09:26 PM

A 75 2.0, complimented with Eric's calipers all around. Now residing in Brasil.

Posted by: Eric_Shea Dec 6 2011, 04:12 PM

No not you but.. Thanks! Another Joe around the mid-Atlantic belt.

Posted by: RiqueMar Dec 6 2011, 07:49 PM

Eric, I just saw this, if you still need more, I'de be more than happy to whip out the camera!

Posted by: Eric_Shea Dec 6 2011, 08:20 PM

Ill take as many as you guys can get! Thanks Enrique!

Posted by: BajaXJ92 Dec 6 2011, 09:31 PM

Jeez Zach, you don't post enough pics of your car

Posted by: nsr-jamie Dec 6 2011, 09:33 PM

How about this picture of my car here in Japan? I have your 4 to 5 bolt rear hub conversion kit on my car. I was very pleased with them, thank you!! I also hope to someday have you rebuild my rear stock 914 calipers with the spacers in them for vented rear rotors and those alluminum front 3inch spacing Brembo calipers for my front 911T suspension. That will have to wait a while though as I have other things to take care of first.

Jamie

Posted by: championgt1 Dec 6 2011, 10:00 PM

Jamie, that is a really cool photo!

Posted by: Eric_Shea Dec 6 2011, 11:57 PM

Updates made.

Thanks guys... when I look at some of these pictures I'm truly honored to be a small part of some great cars. If you want me to add anything to the description, shoot me a PM and I'll update.

Posted by: Series9 Dec 9 2011, 09:36 AM

Nelson's:




Attached image(s)

Posted by: Series9 Dec 9 2011, 09:38 AM

Liz's:




Attached image(s)

Posted by: PeeGreen 914 Dec 9 2011, 11:21 AM

Eric rebuilt a well matched set for me with S calipers in the front and M calipers in the rear. Stopped very well and miss this car every day. Eric walked me through to ensure I had the best pads and equipment for what I wanted.


Attached image(s)

Posted by: eric9144 Dec 9 2011, 11:45 AM

Posted by: Madswede Dec 9 2011, 01:20 PM

I was gonna say I'm sure I have your calipers on there Eric, but Joe beat me to it. We'll send more pics out when the car is completely done, but the one Joe put up already is my favorite (of many favorites ).

Posted by: Ferg Dec 9 2011, 01:28 PM

Once it warms up this one will be officially "touched" by Eric






Attached thumbnail(s)

Posted by: groot Dec 10 2011, 07:40 AM

Eric,

You can throw up this pic of my car from 2009.

Very satisfied customer!!


Attached image(s)