Anyone out there using wheel adapters? Any problems?
Just looking for a cheap way of putting new wheels on!
thanks
ran them on a track car no problems.
Do you have Gt flairs? What size wheel are you using?
What offset?
thanks
have gt flares.
Have run new offset et52 (i think) with 35' spacers up front and 54mm in back. ran 16x7 and 16x9 rims.
now I run old offset with et11 in back and 23 up front.
I run a 21mm spacer up front for more track and to get rid of tire rub on the bigger tires. Out back nothing or 12mm-15mm to fit bigger tires.
I had a set of 17x8.5 on the back and 17x7 upfront and ran 35mm spacers all the way around.
and by the way I have lots of wheels!!!! good prices..
self advertising...
Yes I mean 4lug -> 5lug adapters . What's everyone's
thoughts on using these?
Stephane
An accident waiting to happen. I won't put them on cars, won't work on cars with them here in the shop (except to remove them and toss 'em in the trash!), and won't even road test one. That a strong enough opinion for you? The Cap'n
I was expecting that
Stephane
No I'm 5 lug and talking spacers not 4 to 5 lug conversion.
what about 5 lug to 5 lug adapters? more track without longer studs and spacers? same deal?
for DE's thats what I used to run,,,, had no issues but I don't know bout general acceptance. They looked pretty solid to me. Now I went to longer studs and minimum spacer use. The test tires I using requires some. The normal tires will only require a little up front.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)