Printable Version of Topic

Posted by: Mikey914 Dec 22 2011, 02:11 AM

Did the die for these as most have been pretty buggerd up. Some look like a previous owner has taken a screwdriver to them. They are NLA OEM.
there are 2 styles the early and the late, they vary with the door cap ends.

Both styles will be availble, just want to see how many of each I would need to make to put these in production.

When these were available they listed at over $40 each. Just need ot see if there is enough interest to go into production. The hard work is done, I could have product ready in about 5 weeks. No need to pay for these until they are ready to ship, just need a count of early and lates if you are interested.


Attached image(s)

Posted by: maxwelj Dec 22 2011, 02:19 PM

I'd be in for a set of earlys
Jack

Posted by: strawman Dec 22 2011, 06:25 PM

Put me down for a pair of the late model pieces.

Posted by: phillstek Dec 22 2011, 06:35 PM

I'll take an early set.

phil

Posted by: Mikey914 Dec 22 2011, 06:47 PM

I will be doing up a few sets with the die proving material over the holidays, so I could actually get out a coouple pairs for evaluation. I'll keep everyone posted here.
-Mark

Posted by: MDG Dec 22 2011, 07:27 PM

In for 2 sets of late style

Posted by: pilothyer Dec 22 2011, 07:53 PM

I am in for (2) sets of late.............Jerry

Posted by: okieflyr Dec 22 2011, 08:26 PM

I'm in for a late set..

Posted by: Aircooledfool Dec 22 2011, 08:36 PM

1 late set.

Posted by: ConeDodger Dec 22 2011, 08:56 PM

In. Late!

Posted by: montoya 73 2.0 Dec 22 2011, 09:10 PM

Hey Mark, is that including shipping? Regardless, I would like two (2) sets of both Don't need till actual GB is shipping.

Posted by: banger Dec 22 2011, 09:11 PM

I will take an early set

Posted by: Mikey914 Dec 22 2011, 09:20 PM

QUOTE(montoya 73 2.0 @ Dec 22 2011, 07:10 PM)

Posted by: montoya 73 2.0 Dec 22 2011, 09:34 PM

your the man!

Posted by: pdlightning Dec 22 2011, 11:12 PM

I will take a set of earlys. They will go good with the targa rubber!

Posted by: rallysport70 Dec 23 2011, 07:08 AM

I can't even find these in my pile of parts, but probably need a set. Late. Thx for all you do!!!

Posted by: Gint Dec 23 2011, 10:50 AM

One early set for sure.

Posted by: porbmw Dec 24 2011, 11:33 PM

Hey Mark

Hope you're not reading this tonight....
But please put me down for 2 early sets.
All the best, especially over the holidays.

Thanks
Paul

Posted by: Niklas Dec 25 2011, 06:00 AM

Hi Mikey!

I am in for two early sets.
Can you include one window frame set ?

Merry christmas from Sweden!

Niklas

Posted by: Grelber Dec 25 2011, 07:33 AM

One late set, please.

Posted by: Mr.242 Dec 25 2011, 08:11 AM

1 early please

Posted by: pyolet Dec 25 2011, 10:55 AM

One early set pls. Woody.

Posted by: fastmover34 Dec 25 2011, 01:16 PM

Put me down for a pair of early, maybe two pairs.

Posted by: mrholland2 Dec 29 2011, 08:05 PM

I'll take a set for my 73 (Is that late? Would be nice to understand that better)

SEan

Posted by: Mikey914 Feb 1 2012, 01:03 PM

QUOTE(mrholland2 @ Dec 29 2011, 06:05 PM)

Posted by: Mikey914 Feb 1 2012, 01:04 PM

These will be ready in about 14 days.

Posted by: mepstein Feb 1 2012, 01:17 PM

1 set early please - mark epstein

Posted by: billh1963 Feb 1 2012, 01:25 PM

2 late sets, please

Posted by: brp986s Feb 1 2012, 01:33 PM

If this is the part I'm thinking of it was darn near impossible to insert the seal into the trim piece. It's like they need to made in an opened state so that the seal can be inserted and then pressed closed. Have you tried inserting a seal into your trim piece?

Posted by: carr914 Feb 1 2012, 01:38 PM

I'll take one Early & one Late

T.C.

Posted by: blackmoon Feb 1 2012, 04:04 PM

I'll take a set for 1973, I think you identified as early

Posted by: 7275914911 Feb 1 2012, 04:08 PM

Hey Mark,

Put me down for 1 late pair.

Thanks...Ken

Posted by: Rleog Feb 1 2012, 11:26 PM

One set early ('73). And we can square up for the gas tank sender gasket.

Thanks

Posted by: OU8AVW Feb 2 2012, 09:15 AM

1 set of early ones please. Let me know if they will be coming, I need to remove the ones in there for paint pretty soon

Posted by: mharmon Feb 3 2012, 09:56 AM

I'll take a late set please

Posted by: scoobykvn Apr 14 2012, 04:53 PM

Are there any of these available? I need one early set for my '70. Let me know how much shipped to 43206.

Posted by: t collins Apr 14 2012, 05:18 PM

If not too late I'm in for a set of early
Thanks,

Posted by: Mikey914 Apr 14 2012, 11:26 PM

Your timing is good, I had thought I had this staged but didn't order in the billet I though did.

I have this staged to be extruded the week of the 27th. I hope to have it ready before WCR, if not when I get back.
-Mark

Posted by: rgolia Apr 16 2012, 03:15 PM

I need one for an early door. My other door is a late door and it is fine.

Posted by: effutuo101 Apr 16 2012, 06:08 PM

1 set late please.

Posted by: Mikey914 May 18 2012, 12:11 AM

Lates are being processed now, the Earlys are next. they will be ready in about 3-4 days, I'm just awaiting a sample to assure that I have the dimmensions are correct.


Attached thumbnail(s)

Posted by: Mikey914 May 18 2012, 12:12 AM

Another


Attached thumbnail(s)

Posted by: Mikey914 May 18 2012, 12:46 AM

Other goodies


Attached thumbnail(s)

Posted by: Mikey914 May 20 2012, 11:26 AM

The early ones will be done this week, lates got done this weekend. Thanks to all of you that signed up for these. The processing of these takes more than I had planned. Those that had signed up will get the original price, those from here forward will get $32 a set. Sorry, but these a re a lot more time consuming than we thought.
-mark

Posted by: Type 47 May 20 2012, 07:17 PM

QUOTE(Mikey914 @ May 20 2012, 09:26 AM)

Posted by: Mikey914 May 20 2012, 07:52 PM

Not yet but they will be soon (late tomorrow), I can include with your order if you wnat to drop me a note when your order is complete (not paid for yet), I can add to the package.
-Mark
More pics tomorrow

Posted by: Mikey914 May 24 2012, 02:10 AM

These are done -
Everyone should have got a PM.
Mark

Posted by: Eric_Shea Jun 26 2012, 12:31 PM

Godsend!!

I need a set of late pronto!!!

The nature of the beast herein is the steel insert around the fuzzy mixed with the aluminum trim. Then add the elements and you get that aluminum and steel dissimilar metal corrosion.

Very cool product!