For testing purposes, what should the flow capacity for the D-jet fuel pump be? I thought I read somewhere that it should be 1.5 quarts in 30 seconds. Don't remember if that was before the regulator or after though.
Anyone?
Maybe about half that. Something closer to 20 gallons per hour (1 gal per 3 minutes or so).
Demick
I was 1 quart in 30 seconds. Test location was taken right BEFORE the pressure regulator. Hopefully that is a good spot.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)