Hello and good morning here.
I am new on this Forum and building a 74 914-4 2.0 liter .
With having most of the part, I cant find the mounting points for the manifold pressure sensor and the ECU.
Dos someone has picture from the location?
I tried to match existing holes with the brackets, but no luck.
Thank you
Mr.JAJA
I have a 75 d-jet, should be same. the ECU should have a bracket that it mounts to , and the MPS should have a black braket, triangle shape that attaches to the side wall just up from the fuel rail on passanger side,
Post a picture of these areas in your car, thismight help us too.
welcome to world
phil
I will post a pic this evening if someone hasn't by then. In the meantime you can post some pic's of your project.
Here is a picture of mine -I its usually mounted the opposite direction, but fit better this way when I put the new harness in.
Attached thumbnail(s)
Check the last post in this thread. I have some very clear photos of the ECU and MAPS.
http://www.914world.com/bbs2/index.php?showtopic=57169&st=80
This is Sandy's Ravenna car. Also check other posts in the originality forum.
The ECU bracket bolts to the front of the battery tray.
If air conditioning was installed (at the dealer), they usually moved the ECU up onto the firewall with some L-shaped brackets.
--DD
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)